산업안전보건법 시행령 제45조(공정안전보고서의 제출)
Enforcement Decree of the Occupational Safety and Health Act, Article 45 (Submission of Process Safety Reports)
① 사업주는 제43조에 따른 유해하거나 위험한 설비를 설치(기존 설비의 제조ㆍ취급ㆍ저장 물질이 변경되거나 제조량ㆍ취급량ㆍ저장량이 증가하여 별표 13에 따른 유해ㆍ위험물질 규정량에 해당하게 된 경우를 포함한다)ㆍ이전하거나 고용노동부장관이 정하는 주요 구조부분을 변경할 때에는 고용노동부령으로 정하는 바에 따라 법 제44조제1항 전단에 따른 공정안전보고서를 작성하여 고용노동부장관에게 제출해야 한다. 이 경우 「화학물질관리법」에 따라 사업주가 기후에너지환경부장관에게 제출해야 하는 같은 법 제23조에 따른 화학사고예방관리계획서의 내용이 제44조에 따라 공정안전보고서에 포함시켜야 할 사항에 해당하는 경우에는 그 해당 부분에 대한 작성ㆍ제출을 같은 법 제23조에 따른 화학사고예방관리계획서 사본의 제출로 갈음할 수 있다. <개정 2020.9.8, 2025.10.1>
(1) When a business owner installs (including where the substances manufactured, handled, or stored in existing equipment change, or the quantities manufactured, handled, or stored increase, so that they reach the specified quantities of harmful or dangerous substances under attached Table 13) or relocates harmful or dangerous equipment under Article 43, or changes main structural parts determined by the Minister of Employment and Labor, he or she shall prepare a process safety report under the former part of Article 44 (1) of the Act and submit it to the Minister of Employment and Labor, as prescribed by Ordinance of the Ministry of Employment and Labor. In such cases, where the contents of the chemical accident prevention and management plan under Article 23 of the Chemicals Control Act, which the business owner must submit to the Minister of Climate, Energy and Environment under the same Act, correspond to matters that must be included in the process safety report under Article 44, the preparation and submission of that part may be replaced by submitting a copy of the chemical accident prevention and management plan under Article 23 of the same Act.
② 제1항 전단에도 불구하고 사업주가 제출해야 할 공정안전보고서가 「고압가스 안전관리법」 제2조에 따른 고압가스를 사용하는 단위공정 설비에 관한 것인 경우로서 해당 사업주가 같은 법 제11조에 따른 안전관리규정과 같은 법 제13조의2에 따른 안전성향상계획을 작성하여 공단 및 같은 법 제28조에 따른 한국가스안전공사가 공동으로 검토ㆍ작성한 의견서를 첨부하여 허가 관청에 제출한 경우에는 해당 단위공정 설비에 관한 공정안전보고서를 제출한 것으로 본다.
(2) Notwithstanding the former part of paragraph (1), where the process safety report that a business owner must submit concerns unit process equipment that uses high-pressure gas under Article 2 of the High-Pressure Gas Safety Control Act, and the business owner has prepared safety management regulations under Article 11 of the same Act and a safety improvement plan under Article 13-2 of the same Act and submitted them to the permitting authority with an opinion jointly reviewed and prepared by the Agency and the Korea Gas Safety Corporation under Article 28 of the same Act attached, the business owner shall be deemed to have submitted a process safety report for that unit process equipment.
영어는 이 사이트가 원문에서 옮긴 비공식 번역으로, 영어 공부를 돕기 위한 것입니다. 법적 효력은 한국어 원문에만 있습니다. 낱말 위 한글은 소리 나는 대로 적은 발음이며 굵은 글자가 강세입니다.
시행 2026.8.1 · 대통령령 · 고용노동부 소관