제조물 책임법 제4조(면책사유)
Product Liability Act, Article 4 (Grounds for Exemption)
① 제3조에 따라 손해배상책임을 지는 자가 다음 각 호의 어느 하나에 해당하는 사실을 입증한 경우에는 이 법에 따른 손해배상책임을 면(免)한다.
(1) A person liable for damages under Article 3 shall be exempt from liability for damages under this Act if he or she proves any of the following facts:
1. 제조업자가 해당 제조물을 공급하지 아니하였다는 사실
1. The fact that the manufacturer did not supply the product;
2. 제조업자가 해당 제조물을 공급한 당시의 과학ㆍ기술 수준으로는 결함의 존재를 발견할 수 없었다는 사실
2. The fact that the existence of the defect could not be discovered with the level of science and technology at the time the manufacturer supplied the product;
3. 제조물의 결함이 제조업자가 해당 제조물을 공급한 당시의 법령에서 정하는 기준을 준수함으로써 발생하였다는 사실
3. The fact that the defect resulted from compliance with standards prescribed by statutes in force at the time the manufacturer supplied the product;
4. 원재료나 부품의 경우에는 그 원재료나 부품을 사용한 제조물 제조업자의 설계 또는 제작에 관한 지시로 인하여 결함이 발생하였다는 사실
4. In the case of raw materials or parts, the fact that the defect was caused by instructions on design or production given by the manufacturer of the product that used those raw materials or parts.
② 제3조에 따라 손해배상책임을 지는 자가 제조물을 공급한 후에 그 제조물에 결함이 존재한다는 사실을 알거나 알 수 있었음에도 그 결함으로 인한 손해의 발생을 방지하기 위한 적절한 조치를 하지 아니한 경우에는 제1항제2호부터 제4호까지의 규정에 따른 면책을 주장할 수 없다.
(2) A person liable for damages under Article 3 may not claim exemption under paragraph (1) 2 through 4 if, after supplying the product, he or she knew or could have known that the product had a defect but failed to take appropriate measures to prevent damage from that defect.
영어는 이 사이트가 원문에서 옮긴 비공식 번역으로, 영어 공부를 돕기 위한 것입니다. 법적 효력은 한국어 원문에만 있습니다. 낱말 위 한글은 소리 나는 대로 적은 발음이며 굵은 글자가 강세입니다.
시행 2018.4.19 · 법률 · 공정거래위원회 소관